Home > Companies > Innomed Inc

Innomed Inc


103 Estus Dr
Savannah, GA 31404 United States
Phone:(912) 236-0000
Toll Free Number:(800) 548-2362
[Save to my library]

Overview: Innomed, Inc., is pleased to announce that it was recently awarded an ISO 9001:2008 Management System certificate and an ISO 13485:2003 Management System certificate by SRI Quality System Registrar for the design, manufacture and distribution of surgical instruments and supplies.
Irene Davis, Innomed, Inc. Quality Assurance Manager, announced: "We are pleased that these certifications will further demonstrate to our customers, suppliers, and the community, the high degree of commitment we strive for in providing quality products, exceptional service, and ultimate satisfaction.
UMDC Code: 450605
Fax: (912) 236-7766
Email: info@innomed.net
Website: http://www.innomed.net
Company Type: Private
Business Lines: Manufacturer/Exporter
Sales Channels: Direct
Categories:

Company Rating Be the first to rate this company! You must sign in.

AORI Patellar Retractor
The retractor has a deep basket and two rows of teeth to grab and hold to the lateral side of the patella. The curved handle provides a fulcrum so that the applied force will both displace and evert the patella from the femur. The patellar retractor is placed after a routine midline, midvastus, or medial parapatellar surgical approach to the knee. Once the patella is everted the patellar retractor is applied to the lateral border of the patella.
Read More

Askins Modified Cobra Retractor with Suction Tube 3408
Allows an assistant to hold the retractor and operate two instruments: the retractor for visualization of the acetabulum as well as the suction tip for suction of smoke and debris from the wound and the acetabulum.
Read More

Balfour Locking Adson Forceps 2016
A modified adson forceps designed with a locking ratchet to hold the forceps closed around a small bone fracture.
Read More

Bargo Bone Holding Clamp 1895-01
Designed to aid in the reduction of various fractures such as: spiral, transverse, compound, oblique, or butterfly. The clamp can also be used to secure a plate in place while the screw holes are being drilled and screws inserted. The fracture site can also be manipulated with the clamp being used as a lever.
Read More

Blount Knee Retractor 4850
Designed for retraction in total knee arthroplasty, the long narrow blade easily fits above the capsular ligament at the joint line. Can also be used for knee revision, fitting easily around the implant.
Read More

Bolanos Hip Retractor 6350-R
Designed to help improve femoral exposure while reducing the risk of trochanteric fractures in both posterior and anterior approaches. Designed to lever against cortical bone at the subtrochanteric level, which helps spare the greater trochanter from stresses. The wrap-around design helps the assistant to retract the entire gluteus medius during femoral preparation.
Read More

Bone Hooks 5910
Designed for proximal femoral elevation in total hip replacement or in other surgery with a similar need for bone manipulation. The instrument has a blunt tip and a large handle to accommodate the use of two hands if desired.
Read More

Bozeman Anterior THA Femoral Elevator 6144
Designed to elevate the femur anteriorly, providing exposure to allow broaching of the femoral canal and final placement of the femoral component, during direct anterior approach THA.
Read More

Budny Wire Drill Guide 1188
Designed to provide stability for the insertion of smooth and olive wires during the application of ring-based external fixation systems.
Read More

Byrd Arthroscopic Hip Curettes & Elevators 2044
Designed for use in various arthroscopic hip procedures. The versatile elevators allow freeing up of soft tissue around bone, can assist in removing the fibrous layer off of a cam lesion, and can be used to help elevate the capsule. They are also useful for mobilizing the labrum in preparation for repair or acetabular rim trimming.
Read More

Calcaneal Lateral Column Spreader 1725
Used for lateral column lengthening of the calcaneus.
Read More

Calcaneal Spreaders 1880
Separates the calcaneal osteotomized bone for placement of tricortical bone graft. Has pads with a large surface area, which easily separates the calcaneal osteotomized bone for placement of tricortical bone graft. The large pad surface area helps prevent the compression of soft calcaneal cancellous bone.
Read More

Calvo Medial Malleolus Fracture Clamp 1801-L
Designed to reduce and hold a displaced medial malleolus fracture.
Read More

Cannestra Trochanteric Fracture Reduction Clamp 3860-L
Clamping ends are curved and rotated to allow maximum bony contact upon fracture reduction. Ideal for fractures with a flexed anterior cortical spike. Made for right and left hip fracture configurations.
Read More

Capello Patient Positioner 4090
Two-piece board construction allows for easier use and storage. Includes: Board, Gel Pad, (4) 6" Pegs, (4) 9" Pegs, (2) Stabilizing Clamps, (2) Table Clamps. All gel pads, pegs and peg height extensions can be used with existing peg boards. Peg Extensions and Peg Pads are optional. The board is also available in a one-piece design.
Read More

Chang Pin Clamp 1760-01
Used for small bones, the clamp allows accurate insertion of pins for internal fixation.
Read More

Cherf Leg Holder 2270
Useful for all lower extremity procedures and particularly helpful for supporting the leg with the patient positioned in the lateral position. By holding the foot/ankle in an externally rotated position, the knee can be locked into extension which helps eliminate the need for manual support. The leg holder may also be used to support the limb for surgical patients in the supine position such as for knee and foot/ankle procedures.
Read More

Chipper Anterior Cervical Lordotic Distractors 7151-00
Designed to be used with flouroscopy in order to evaluate proper positioning within the interspace.
Read More

Cobra Retractor - Standard 6130
A general purpose instrument for use around the femur and acetabulum.
Read More

Cobra Retractor - Standard Wide 6140
A general purpose instrument for use around the femur and acetabulum.
Read More

Comfort Grip Handle Retractors 6216
Comfort grip ergonomic handle helps reduce fatigue and slippage.
Read More

Distal Femur Distractor
Designed to distract the distal femur away from the proximal tibia during total knee surgery. It is inserted into a predrilled hole in the distal femur. The bent handle allows the femur to be distracted away from the tibia. The intramedullary rod portion is fluted.
Read More

DMP Wire Tighteners 8729
Now with four wire holes-two for up to 20 gauge wires, and two for up to 18 gauge wires. T-Handle end is used to hand tighten a wire.
Read More

Duncan Metatarsal Clamp 1638
Designed to clamp and hold an osteotomized metatarsal bone in the corrected position for fixation through the opening in the top of the clamp.
Read More

Durham Leg Positioner 4105
Supplied with a sterilizable table clamp. The pad is made of semi-dense foam to help prevent pressure points and is sealed with a washable coating.
Read More

Extra Large Cobra Retractors 7630-01
A general purpose instrument for use around the femur and acetabulum in larger patients.
Read More

Femoral Tibial Coated Spreader Bar 1820
Designed to separate the femur and tibia when implant components are in place. The end is coated to help protect from scratching component surfaces.
Read More

Flexible Osteotome System S0011-00
Sharp, flexible blades are well suited for loosening implants from cement or bony ingrowth fixation. Various blade widths and profiles allow great flexibility to follow the implant contours. Modular handles are made of high impact surgical stainless steel and have a quick-coupling positive locking mechanism for ease of use and quick blade changes. Slap hammer threads into the handle and is designed to facilitate blade removal.
Read More

Fromm Knee & Tibial Triangles 2760-00
Designed to position and hold the femur and tibia during intramedullary nailing of the tibia, ligament repairs and extremity fractures. Allows knee to be flexed greater than 90 to allow reaming and nail insertion without displacing fracture. The triangles are available in three heights, 11", 14", and 16". The two smaller triangles are designed to fit inside the larger triangle for storage.
Read More

George Arthroscopic Knee Positioner 2735
Shape does not squeeze the thigh, making the need for a thigh tourniquet optional. If desired, the unit can easily be rotated out of the way without disrupting the sterile field. Using with a standard operating table clamp, the unit can easily be raised or lowered to accommodate all thigh sizes.
Read More

Harwin Modified Cobra Retractor 6143
Designed for use during total hip and knee surgery. The long handle and obtuse angle provide more ergonomic leverage-especially helpful for use with obese patients. Wide, concave blade design allows for enhanced exposure-especially useful in anterior hip surgery with placement of reamers, and to elevate and expose the proximal femur. For total knee surgery, the retractor help brings the tibia forward.
Read More

Humeral Head Depressor 1520
Placed over the humeral head and hooked around the posterior lip of the glenoid rim, to expose the glenoid fossa for total shoulder reconstruction and reconstructive stabilization procedures done through a standard delto-pectoral approach.
Read More

Incavo Wire Passer 8610-01
Used for passing multiple cerclage wires around bone. Designed to pass multiple cerclage wires around a bone during a multiple wire wrap procedure. Accepts a 5/32" diameter wire.
Read More

Joint, Calcaneal, Small Bone Compressor/Distractor 4865-LS
Selection lever switches the mechanism from compression to distraction. Simply squeeze the handle one time after direction selection to engage the mechanism. Two hole sizes for pin size selection. Calibrated ratchet handle.
Read More

Kirschenbaum Foot Positioner 2590
The foot rest is dome shaped for optimal foot contact and positioning the leg in flexion, and can be rotated. The unit can be used under the drape by attaching it to a standard table attachment or it can be sterilized for use on top of the drape. It can be attached to the table with the optional sterilizable table clamp. The foot rest is supplied with a removable, sterilizable silicone foot pad.
Read More

Large Patient Peg Board Positioner Post Assembly 4150-10P
Designed to work in conjunction with the Capello Patient Positioner (or any other patient positioner).
Read More

Lawton Flexor Tendon Repair Clamp 1795
Helps to reapproximate the lacerated flexor tendon and tie the core suture(s). Luer lock ends allow the interchange of two 25g disposable hypodermic needles.
Read More

Lombardi Bone Hooks 5925
Used to help elevate the femur
Read More

Long Bonney Tissue Forceps 5040
Extra length-3" more than standard-allows for use in deep wound areas.
Read More

Lower Extremity Leg Positioner 2745
Also well suited for use with ankle fractures. Supplied with one autoclavable silicone pad. Positioner is radiolucent and gas or steam sterilizable.
Read More

Ludloff/Mau Osteotomy Fixation Clamp 1812
Used after lateral hallux valgus correction of the metatarsal, the clamp allows for osteotomy fixation and cannulated screw guide wire direction.
Read More

Mazzara Rongeur with Pistol Grip Handle 1765-01
Pistol Grip handle lessens hand fatigue and slippage, and allows for better visualization.
Read More

McCarthy Hip Distractor 8990
The unit is designed to fit onto a standard operating table. The four upright bars are secured to the O.R. table utilizing the standard O.R. table socket clamps. The thigh pad holds the patient stable allowing distraction to be applied to the affected limb. A stabilizing bar is used to keep the distractor and thigh assembly stable. The foot piece is secured with velcro straps and a web strap used with a tightening mechanism.
Read More

McPherson Retractor Extender 6022
Designed to extend a standard retractor. Extender fits most retractors, providing additional retraction leverage.
Read More

Medial Malleolar/Bone Fragment Clamps 1840
Quick tightening & release low profile clamp with unlimited settings
Read More

Mini-lexer Osteotomes 5270-01
Used for cement or bone removal where limited access is available, as in revision hip surgery. Features a 17" long shaft, available straight or with an arced end. Mini-lexer Osteotomes Helpful in osteophyte and cement removal.
Read More

MIS Distractor H3700
Designed specifcally for the Standard Lateral Port Set, this distractor fits easily through the center aperture and works with numerous pedicle screw systems.
Read More

Multi-Adjustment Hip Positioner 4030
Multi-adjustment arms allow the positioner to be adjusted to fit all sizes of patients. Especially helpful with large patients where reaching the a.s.i.s. is needed for stabilization.
Read More

Ortho Mallets 7810
Designed to exert force on osteotomes, chisels, gauges and other instruments. Ortho Mallets with Easy Grip Handles.
Read More

Ortho Rongeur with Easy Grip Handle
Offset handles give better gripping power and help reduce hand fatigue. Finger grooves help to prevent hand slippage. The offset handle also allows for better visualization. Available in three jaw bite sizes.
Read More

Orthopedic Needle Holder/Scissors 3045
Orthopedic Needle Holder/Scissors Drive a needle and cut a suture without changing instruments. Designed to drive a needle and cut a suture without changing instruments. Longer sizes are helpful in orthopedics.
Read More

Periosteal Elevator 3450
Designed with a curved end for easier use, and sharper sides for ease of elevating and stripping. The handle is designed for better control.
Read More

Polyaxial Hex Screwdriver H4760
Rotating universal joint allows for screw access in both hard to reach areas and MIS applications.
Read More

Shereff Ankle Distractor 1805
Helps to increase the ease and effectiveness of operative arthroscopy of the ankle with non-invasive distraction.
Read More

Small Bone Compressor/Distractor 1825-01
Designed to distract small joints in a linear direction in hand, spine, and foot surgery. Multiple hinge design allows better joint visualization and access. Has a distal hinge which can be loosened once the distraction nut is tightened, thereby allowing the surgeon to move the handle out of the surgical field.
Read More

Small Cable/Wire Passer H5750
Small 5.5mm tubing makes these an excellent choice for passing cable around bone for trauma type cases and spinal fusion procedures.
Read More

Soft Impact Mallets 7820
Soft Impact Mallets with Easy Grip Handles Provides shock absorbing force.
Read More

Strap for Shereff Ankle Distractor 1805-S
Designed to hold the ankle during use with the Shereff Ankle Distractor
Read More

Stulberg Hip Positioner 4150
The Stulberg Hip Positioner is used for stable positioning of a patient during total hip and revision surgery. It is designed to attach directly to the operating table utilizing the existing table adapters. The upright pads are made of semi-dense foam to help prevent pressure points and are sealed with a washable coating. The coating also helps to lessen the possibility of skin breakdown.
Read More

Universal Bone Grafting/Impacting Forceps 5010-01
Bone graft can be grasped, placed and impacted without changing hands or instruments. The forceps are designed with grasping ends for delivery of bone graft. When the graft is in place, the forceps are closed, which forms the ends into an impacting punch. A striking platform is attached to the end of the forceps for tapping and tamping the graft. Four end diameters are available in two lengths.
Read More

Universal Screw Removal Instrument System S0010-00
Used for removal of stripped hex screws, buried screws, and partial screws with broken screw heads. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
Read More

Universal Screwdriver Set 5195
Helpful during revision total joint surgery where screws have been used, removal of bone plates, fracture fixation screws or bone graft screws. Set consists of: 6 (six) double ended screwdriver bits-small & large single slot, cross & cruciate, 3.5mm & 4.5mm hex, small & large phillips, small & large Star-a handle which accommodates any of the above bits, and a sterilization case.
Read More

Vosburg Cannulated Periarticular Clamp 1864
By compressing the fracture with the clamp and then passing two k-wires, the clamp can then be removed to allow more working room and versatility when applying a plate.
Read More

Walsh Pelvic Positioning System 4025
Before surgery with the patient in the supine position, the arms of the unit are adjusted laterally along the bar to conform to the patients ASISs. Vertical adjustment is also possible to accommodate various hip positioner designs. After the patient is secured using a hip positioner, the unit is placed on the patients ASISs again.
Read More

Weinraub Joint and Calcaneal Spreader 1870
Designed to assist in the opening of small joints of the hand and foot for the application of fusion and graft techniques. Provides excellent joint exposure without blocking intra-articular or osteotomy access. Helps prevent slippage or falling out of the joint by placing the arms on either side of the area to be distracted, driving two pins and opening the joint.
Read More

Wertz Anterior THA Femoral Elevator 6148
Helps deliver the femur out of the incision during anterior total hip arthroplasty
Read More

Wixson Hip Positioner 4050
The Wixson Hip Positioner is used for stable positioning of a patient during total hip and revision surgery. It is designed to be placed on top of the operating table. The base plate is rubber-backed to reduce slipping on the table. The uprights can easily be slid in and out of the multiple slots in the plate for desired positioning and locked into position with the locking bolt.
Read More

Woolley Tibia Punch 5140
Designed to impact cancellous bone in the subchondral weight bearing region of the tibia. This helps to improve the mechanical interlock in the cancellous bone/cement interface. The sharp tips can be used on normal and dense cancellous bone, and they can also be used when a significant deformity has been encountered resulting in sclerotic bone.
Read More

Product Literature/Brochure:

Periosteal Elevator 3450
Designed with a curved end for easier use, and sharper sides for ease of elevating and stripping. The handle is designed for better control.
Read More

Chipper Anterior Cervical Lordotic Distractors 7151-00
Designed to be used with flouroscopy in order to evaluate proper positioning within the interspace.
Read More

MIS Distractor H3700
Designed specifcally for the Standard Lateral Port Set, this distractor fits easily through the center aperture and works with numerous pedicle screw systems.
Read More

Bozeman Anterior THA Femoral Elevator 6144
Designed to elevate the femur anteriorly, providing exposure to allow broaching of the femoral canal and final placement of the femoral component, during direct anterior approach THA.
Read More

Byrd Arthroscopic Hip Curettes & Elevators 2044
Designed for use in various arthroscopic hip procedures. The versatile elevators allow freeing up of soft tissue around bone, can assist in removing the fibrous layer off of a cam lesion, and can be used to help elevate the capsule. They are also useful for mobilizing the labrum in preparation for repair or acetabular rim trimming.
Read More

Wertz Anterior THA Femoral Elevator 6148
Helps deliver the femur out of the incision during anterior total hip arthroplasty
Read More

Ortho Mallets 7810
Designed to exert force on osteotomes, chisels, gauges and other instruments. Ortho Mallets with Easy Grip Handles.
Read More

Soft Impact Mallets 7820
Soft Impact Mallets with Easy Grip Handles Provides shock absorbing force.
Read More

Orthopedic Needle Holder/Scissors 3045
Orthopedic Needle Holder/Scissors Drive a needle and cut a suture without changing instruments. Designed to drive a needle and cut a suture without changing instruments. Longer sizes are helpful in orthopedics.
Read More

Flexible Osteotome System S0011-00
Sharp, flexible blades are well suited for loosening implants from cement or bony ingrowth fixation. Various blade widths and profiles allow great flexibility to follow the implant contours. Modular handles are made of high impact surgical stainless steel and have a quick-coupling positive locking mechanism for ease of use and quick blade changes. Slap hammer threads into the handle and is designed to facilitate blade removal.
Read More

Comfort Grip Handle Retractors 6216
Comfort grip ergonomic handle helps reduce fatigue and slippage.
Read More

Askins Modified Cobra Retractor with Suction Tube 3408
Allows an assistant to hold the retractor and operate two instruments: the retractor for visualization of the acetabulum as well as the suction tip for suction of smoke and debris from the wound and the acetabulum.
Read More

Cobra Retractor-Standard 6130
A general purpose instrument for use around the femur and acetabulum.
Read More

Cobra Retractor-Standard Wide 6140
A general purpose instrument for use around the femur and acetabulum.
Read More

Harwin Modified Cobra Retractor 6143
Designed for use during total hip and knee surgery. The long handle and obtuse angle provide more ergonomic leverage-especially helpful for use with obese patients. Wide, concave blade design allows for enhanced exposure-especially useful in anterior hip surgery with placement of reamers, and to elevate and expose the proximal femur. For total knee surgery, the retractor help brings the tibia forward.
Read More

McPherson Retractor Extender 6022
Designed to extend a standard retractor. Extender fits most retractors, providing additional retraction leverage.
Read More

Bolanos Hip Retractor 6350-R
Designed to help improve femoral exposure while reducing the risk of trochanteric fractures in both posterior and anterior approaches. Designed to lever against cortical bone at the subtrochanteric level, which helps spare the greater trochanter from stresses. The wrap-around design helps the assistant to retract the entire gluteus medius during femoral preparation.
Read More

AORI Patellar Retractor
The retractor has a deep basket and two rows of teeth to grab and hold to the lateral side of the patella. The curved handle provides a fulcrum so that the applied force will both displace and evert the patella from the femur. The patellar retractor is placed after a routine midline, midvastus, or medial parapatellar surgical approach to the knee. Once the patella is everted the patellar retractor is applied to the lateral border of the patella.
Read More

Blount Knee Retractor 4850
Designed for retraction in total knee arthroplasty, the long narrow blade easily fits above the capsular ligament at the joint line. Can also be used for knee revision, fitting easily around the implant.
Read More

Universal Screw Removal Instrument System S0010-00
Used for removal of stripped hex screws, buried screws, and partial screws with broken screw heads. The drive end (A/O) is designed for easy and quick engagement with the universal instrument handle.
Read More

Polyaxial Hex Screwdriver H4760
Rotating universal joint allows for screw access in both hard to reach areas and MIS applications.
Read More

Universal Screwdriver Set 5195
Helpful during revision total joint surgery where screws have been used, removal of bone plates, fracture fixation screws or bone graft screws. Set consists of: 6 (six) double ended screwdriver bits-small & large single slot, cross & cruciate, 3.5mm & 4.5mm hex, small & large phillips, small & large Star-a handle which accommodates any of the above bits, and a sterilization case.
Read More

Bone Hooks 5910
Designed for proximal femoral elevation in total hip replacement or in other surgery with a similar need for bone manipulation. The instrument has a blunt tip and a large handle to accommodate the use of two hands if desired.
Read More

Lombardi Bone Hooks 5925
Used to help elevate the femur
Read More

Mazzara Rongeur with Pistol Grip Handle 1765-01
Pistol Grip handle lessens hand fatigue and slippage, and allows for better visualization.
Read More

Ortho Rongeur with Easy Grip Handle
Offset handles give better gripping power and help reduce hand fatigue. Finger grooves help to prevent hand slippage. The offset handle also allows for better visualization. Available in three jaw bite sizes.
Read More

Femoral Tibial Coated Spreader Bar 1820
Designed to separate the femur and tibia when implant components are in place. The end is coated to help protect from scratching component surfaces.
Read More

Calcaneal Spreaders 1880
Separates the calcaneal osteotomized bone for placement of tricortical bone graft. Has pads with a large surface area, which easily separates the calcaneal osteotomized bone for placement of tricortical bone graft. The large pad surface area helps prevent the compression of soft calcaneal cancellous bone.
Read More

Weinraub Joint and Calcaneal Spreader 1870
Designed to assist in the opening of small joints of the hand and foot for the application of fusion and graft techniques. Provides excellent joint exposure without blocking intra-articular or osteotomy access. Helps prevent slippage or falling out of the joint by placing the arms on either side of the area to be distracted, driving two pins and opening the joint.
Read More

Calcaneal Lateral Column Spreader 1725
Used for lateral column lengthening of the calcaneus.
Read More

Balfour Locking Adson Forceps 2016
A modified adson forceps designed with a locking ratchet to hold the forceps closed around a small bone fracture.
Read More

Universal Bone Grafting/Impacting Forceps 5010-01
Bone graft can be grasped, placed and impacted without changing hands or instruments. The forceps are designed with grasping ends for delivery of bone graft. When the graft is in place, the forceps are closed, which forms the ends into an impacting punch. A striking platform is attached to the end of the forceps for tapping and tamping the graft. Four end diameters are available in two lengths.
Read More

Long Bonney Tissue Forceps 5040
Extra length-3" more than standard-allows for use in deep wound areas.
Read More

Capello Patient Positioner 4090
Two-piece board construction allows for easier use and storage. Includes: Board, Gel Pad, (4) 6" Pegs, (4) 9" Pegs, (2) Stabilizing Clamps, (2) Table Clamps. All gel pads, pegs and peg height extensions can be used with existing peg boards. Peg Extensions and Peg Pads are optional. The board is also available in a one-piece design.
Read More

Large Patient Peg Board Positioner Post Assembly 4150-10P
Designed to work in conjunction with the Capello Patient Positioner (or any other patient positioner).
Read More

Multi-Adjustment Hip Positioner 4030
Multi-adjustment arms allow the positioner to be adjusted to fit all sizes of patients. Especially helpful with large patients where reaching the a.s.i.s. is needed for stabilization.
Read More

Stulberg Hip Positioner 4150
The Stulberg Hip Positioner is used for stable positioning of a patient during total hip and revision surgery. It is designed to attach directly to the operating table utilizing the existing table adapters. The upright pads are made of semi-dense foam to help prevent pressure points and are sealed with a washable coating. The coating also helps to lessen the possibility of skin breakdown.
Read More

Wixson Hip Positioner 4050
The Wixson Hip Positioner is used for stable positioning of a patient during total hip and revision surgery. It is designed to be placed on top of the operating table. The base plate is rubber-backed to reduce slipping on the table. The uprights can easily be slid in and out of the multiple slots in the plate for desired positioning and locked into position with the locking bolt.
Read More

Fromm Knee & Tibial Triangles 2760-00
Designed to position and hold the femur and tibia during intramedullary nailing of the tibia, ligament repairs and extremity fractures. Allows knee to be flexed greater than 90 to allow reaming and nail insertion without displacing fracture. The triangles are available in three heights, 11", 14", and 16". The two smaller triangles are designed to fit inside the larger triangle for storage.
Read More

George Arthroscopic Knee Positioner 2735
Shape does not squeeze the thigh, making the need for a thigh tourniquet optional. If desired, the unit can easily be rotated out of the way without disrupting the sterile field. Using with a standard operating table clamp, the unit can easily be raised or lowered to accommodate all thigh sizes.
Read More

Kirschenbaum Foot Positioner 2590
The foot rest is dome shaped for optimal foot contact and positioning the leg in flexion, and can be rotated. The unit can be used under the drape by attaching it to a standard table attachment or it can be sterilized for use on top of the drape. It can be attached to the table with the optional sterilizable table clamp. The foot rest is supplied with a removable, sterilizable silicone foot pad.
Read More

Lower Extremity Leg Positioner 2745
Also well suited for use with ankle fractures. Supplied with one autoclavable silicone pad. Positioner is radiolucent and gas or steam sterilizable.
Read More

Cherf Leg Holder 2270
Useful for all lower extremity procedures and particularly helpful for supporting the leg with the patient positioned in the lateral position. By holding the foot/ankle in an externally rotated position, the knee can be locked into extension which helps eliminate the need for manual support. The leg holder may also be used to support the limb for surgical patients in the supine position such as for knee and foot/ankle procedures.
Read More

Bargo Bone Holding Clamp 1895-01
Designed to aid in the reduction of various fractures such as: spiral, transverse, compound, oblique, or butterfly. The clamp can also be used to secure a plate in place while the screw holes are being drilled and screws inserted. The fracture site can also be manipulated with the clamp being used as a lever.
Read More

Calvo Medial Malleolus Fracture Clamp 1801-L
Designed to reduce and hold a displaced medial malleolus fracture.
Read More

Chang Pin Clamp 1760-01
Used for small bones, the clamp allows accurate insertion of pins for internal fixation.
Read More

Duncan Metatarsal Clamp 1638
Designed to clamp and hold an osteotomized metatarsal bone in the corrected position for fixation through the opening in the top of the clamp.
Read More

Ludloff/Mau Osteotomy Fixation Clamp 1812
Used after lateral hallux valgus correction of the metatarsal, the clamp allows for osteotomy fixation and cannulated screw guide wire direction.
Read More

Medial Malleolar/Bone Fragment Clamps 1840
Quick tightening & release low profile clamp with unlimited settings
Read More

Vosburg Cannulated Periarticular Clamp 1864
By compressing the fracture with the clamp and then passing two k-wires, the clamp can then be removed to allow more working room and versatility when applying a plate.
Read More

Lawton Flexor Tendon Repair Clamp 1795
Helps to reapproximate the lacerated flexor tendon and tie the core suture(s). Luer lock ends allow the interchange of two 25g disposable hypodermic needles.
Read More

Cannestra Trochanteric Fracture Reduction Clamp 3860-L
Clamping ends are curved and rotated to allow maximum bony contact upon fracture reduction. Ideal for fractures with a flexed anterior cortical spike. Made for right and left hip fracture configurations.
Read More

Budny Wire Drill Guide 1188
Designed to provide stability for the insertion of smooth and olive wires during the application of ring-based external fixation systems.
Read More

DMP Wire Tighteners 8729
Now with four wire holes-two for up to 20 gauge wires, and two for up to 18 gauge wires. T-Handle end is used to hand tighten a wire.
Read More

Incavo Wire Passer 8610-01
Used for passing multiple cerclage wires around bone. Designed to pass multiple cerclage wires around a bone during a multiple wire wrap procedure. Accepts a 5/32" diameter wire.
Read More

Humeral Head Depressor 1520
Placed over the humeral head and hooked around the posterior lip of the glenoid rim, to expose the glenoid fossa for total shoulder reconstruction and reconstructive stabilization procedures done through a standard delto-pectoral approach.
Read More

Woolley Tibia Punch 5140
Designed to impact cancellous bone in the subchondral weight bearing region of the tibia. This helps to improve the mechanical interlock in the cancellous bone/cement interface. The sharp tips can be used on normal and dense cancellous bone, and they can also be used when a significant deformity has been encountered resulting in sclerotic bone.
Read More

Shereff Ankle Distractor 1805
Helps to increase the ease and effectiveness of operative arthroscopy of the ankle with non-invasive distraction.
Read More

Strap for Shereff Ankle Distractor 1805-S
Designed to hold the ankle during use with the Shereff Ankle Distractor
Read More

Joint, Calcaneal, Small Bone Compressor/Distractor 4865-LS
Selection lever switches the mechanism from compression to distraction. Simply squeeze the handle one time after direction selection to engage the mechanism. Two hole sizes for pin size selection. Calibrated ratchet handle.
Read More

Small Bone Compressor/Distractor 1825-01
Designed to distract small joints in a linear direction in hand, spine, and foot surgery. Multiple hinge design allows better joint visualization and access. Has a distal hinge which can be loosened once the distraction nut is tightened, thereby allowing the surgeon to move the handle out of the surgical field.
Read More

McCarthy Hip Distractor 8990
The unit is designed to fit onto a standard operating table. The four upright bars are secured to the O.R. table utilizing the standard O.R. table socket clamps. The thigh pad holds the patient stable allowing distraction to be applied to the affected limb. A stabilizing bar is used to keep the distractor and thigh assembly stable. The foot piece is secured with velcro straps and a web strap used with a tightening mechanism.
Read More

Distal Femur Distractor
Designed to distract the distal femur away from the proximal tibia during total knee surgery. It is inserted into a predrilled hole in the distal femur. The bent handle allows the femur to be distracted away from the tibia. The intramedullary rod portion is fluted.
Read More

Please provide the following information and a representative of Innomed Inc will contact you to assist with any questions you might have.