| |
|
|
|
|
|
The AcuMatch® A-Series acetabular shell and liner were developed using elements of design seen in the clinically successful Exactech MCS system. In the new AcuMatch design, Exactech achieves the delicate balance of biocompatibility, longevity and flexibility
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
The DURALOC and POLY-DIAL Constrained Acetabular Liners are indicated for use as components of a total hip prosthesis in primary or revision patients at high risk of hip dislocation due to a history of prior dislocation, bone loss, joint or soft tissue laxity, neuromuscular disease or intraoperative instability.ContraindicationsAny infection in or about the hip joint.Bone or musculature compromised by disease, infections or prior implantation, which cannot provide adequate support of fixation for the prosthesis.Skeletal immaturity
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
The DYNASTY™ Acetabular Cup System is the culmination of the INTERSEAL®, TRANSCEND® and LINEAGE® Cup designs. With A-CLASS® metal and A-CLASS® cross-linked poly bearing surfaces, the DYNASTY™ shell sizes range from 46- 68mm in 2mm increments and head sizes range from 28-48mm. The DYNASTY™ Cup System also includes color-coordinated trial shells and heads, further accentuating the ease of use of this system
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
The DJO Surgical Metal/Metal CoCr acetabular liners and femoral heads utilize new production technology, which includes removal of large block carbides, resulting in a smooth, groove-free surface.
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
Connexion GXL® enhanced polyethylene acetabular liners provide a low wear rate while maintaining an appropriate level of fracture toughness
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
INTERSEAL® Acetabular Cup system addresses the contemporary issues of the two-piece cementless acetabular component design.
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
Joint stability and proper center of rotation are critical requirements for a successful total hip replacement. The LINEAGE® Acetabular
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
The Biomet® Metal-on-Metal Hip Joint Replacement Prosthesis is intended for use in non-cemented primary and revision hip joint replacement procedures. The metal liners are intended for use with specific metal-on-metal femoral articulating heads. The specialized femoral heads and metal-on-metal liners are to be used with Biomet® primary and revision femoral components.
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
Designed specifically to address the issue of wear debris, the M2a - Taper™ metal-on-metal system offers surgeons and patients the benefits of modern technological advancements coupled with the experience of more than 40 years of metal-on-metal usage in-vivo. Validated by extensive laboratory testing and more than five years of usage in-vivo, the M2a - Taper™ combines the advantages of exceptionally low wear rates - 1/350th that of metal on polyethylene articulations, with the clinically superior performance of Biomet's acetabular and femoral components
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|
|
|
|
|
Liners are made of ultra high molecular weight polyethylene. Design allows for 10 degree or 20 degree buildup to prevent dislocation.
|
Company:
Date:
June 26, 2008
|
|
|
|
|
|