| |
|
|
|
|
|
Smith & Nephew unveils the most accurate guide available for cruciate reconstruction. The ACUFEX DIRECTOR Drill Guide conforms to each patient’s anatomy, offering surgeons flexibility, accuracy and control. The ACUFEX DIRECTOR is compact, for easier handling and added control. It was designed not only to fit comfortably in the surgeon’s hand, but to accommodate the full spectrum of knee anatomy.
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
the Inion Anchron™Plus Inserter onto the drill hole.Ensure that the Inserter is perpendicular to the drill hole.4.2 Insert the anchor into the drilled hole by advancing the pusherthumb knob, until it reaches the positive stop. Note! The suturetensioning trigger has to be allowed to freely move towards thedistal end of Inserter, while advancing the anchor with the pusherthumb knob
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
Insert the K-Wire using the Double
Drill Guide at the entry point of
the final screw placement to the
appropriate depth.
Use the image intensifier to control
reduction and K-Wire placement.
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
The Asnis IIICannulated Screw Systems
are designed to optimise surgical
outcomes while simplifying procedures.
The systems incorporate several
features intended to enhance screw
placement, insertion and removal
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
ConMed Linvatec's proprietary Self-Reinforced polymer
technology has once again been incorporated into
the Bio Mini-Revo Suture Anchor System. This unique
system includes a 3.1mm diameter screw-in implant
manufactured from our patented Self-Reinforced
96L/4D Poly Lactic Acid. The implant is pre-loaded on
a disposable driver and is pre-threaded with # 2 Hi-Fi™
high strength suture
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
The CHARLOTTE™ Foot and Ankle Fixation System is a comprehensive line ofadvanced solutions for reconstructive surgery. Designed with the collectiveexpertise of leading foot and ankle surgeons, the system pairs elegantinstrumentation with high-performance implant design. The resulting systemenables modern operative techniques that drive improved patient outcomes andincrease surgical efficiency
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
Varying spacer widths allow correction of the intermetatarsal angle in 1mm increments. The plate with no spacer may be used for stable fixation of proximal crescentric or chevron osteotomies.
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
The DARCO® MFS™ plating system for the forefoot has been designed in close collaboration with internationally renowned surgeons to address the specifi c needs of reconstructive foot and ankle surgery. After many years of iterative research and development, the resulting product is highly refi ned for treatment of challenging forefoot disorders. All implants are manufactured to exacting standards from Titanium Alloy in our German facility. The system has been designed to take advantage of the many benefi ts of fi xedangle locked screw fi xation.
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
The MPJ™ plates are designed for anatomic fixation of the 1st metatarsal/phalangeal joint.
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|
|
|
|
|
Slightly more rigid than the BOW™ plates. Useful for metatarsal base osteotomies and Lisfranc fusions
|
Company:
Date:
July 15, 2008
|
|
|
|
|
|